Just breathe buddha, Beanie Vinyl decal | LIMITED STOCK
Beanie Vinyls decal- available in limited quantities.
Just Breathe: 2.2"x1.3"in approx.
Buddha only: 1.5"x1.3"in approx.
- Colors on the screen will differ from the actual product depending on monitor settings. See Shop policies for more information.
- Tracking can be purchased separately.
How to apply a vinyl decal:
Clean the area thoroughly with rubbing alcohol or soap and water.
Prepare the sticker for application by firmly rubbing a credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transparent grid transfer tape.
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Slowly peel the transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
All designs are copyrighted and and cannot be reproduced or altered in any way without obtaining written permission from us. Items and design are for personal use only, not for resale. You are welcome to give them as gifts :) Distribution or reselling of these graphics is strictly prohibited.